This function only works for the following models of DVRs:
4-Channel DVRs / POE NVRs / Wireless NVRs:
8-Channel DVRs / POE NVRs / Wireless NVRs:
ZR08ZN; ZR08ZM; ZR08FN; ZR08FM; ZR08BN; ZR08BM; ZR08CN; ZR08CM;
Remark: Our DVR only can be compatible for RT3070 or RT5370 Wifi module as picture:
Connection: Plug RT3070 or RT5370 Wifi module into the USB2.0 interface.
NOTE: The USB port in front panel and the second USB port in rear panel are exactly same
one port, which means this port just be put in two position for convenience.
So, when you use the USB in front panel, the second USB in rear panel will be
Step 1: open the desk menu by right-click → set up → Network
Step 2: choose the WIFI set up
Step 3: tick the “wifi enable”
Step 4: click the “Search signal” button to search wifi
Step 5: then input the wifi password you have searched
Step 6: click the “set up” button
Step 7: click the “Apply” button
Step 8: click the “Exit” button to exit the window, it will be displayed in warning window, click “ok” and back to the Main menu.
Step 9: when you finish all those steps, click the “information” button
Step 10: click the “network” button to check the Internet is OK.