1. Connect DVR to LAN
If you want to connect the DVR to network by Wifi, you need to buy one USB RT3070 wifi adapter for this system, without it, it can not connect to WiFi.
For detailed of wifi setting, please follow below instruction:
B.By LAN cable
Plug a LAN cable directly to the RJ45 port of the DVR.
2.Test your DVR network
(1)Right click Mouse - Main menu - Set up - Network.
(2)Tick “Obtain an IP address automatically”
(3)Click “Test”,if remind “OK”, that is connect network successfully.
Note: Please ensure DHCP in your router is open
3.Set up remote monitoring on smartphone
(1)Download and install the APP( secu365) on phone
A.iPhone/iPad User: Search secu365 in app store and install it, or scan the following QR code to download secu365
B.Android User: Search secu365 in google play and install it, or scan the following QR code to download secu365
(2)Open the APP, click “+” --Manual--GID type , input the following information:
Name: Device name (It is convenient for you to distinguish the different device)
GID: The device ID, which can be obtained by DVR system menu (Main menu-information-System- device ID).It can be input via QR code scanning.
User: admin (defaulted)
Password: It ‘s blank, no password, (Defaulted, same as DVR system password)
Channel Number: DVR channel
(3)Click “done” to access to the displayed screen.
(4)Select the device, click the channels to access to the cameras.
NOTE: It only supports viewing at most 4 cameras at the same time. You can view the other four cameras by switching off the first four cameras firstly and then selecting the last four cameras.